I’m away from my system for a day or two but I’ll have to investigate further. I don’t think there’s any problem with the modules, especially since it’s multiple modules — they just seem not to like the gates from my couple of Verbos modules specifically, unless attenuated slightly. I’ll have to see if it’s *any* high gate, or just the gates from my Verbos modules. I sort of suspect the latter, but I don’t know how a gate from a Verbos module would be different from any other gate except being a bit hotter.Absolutely! No one needs a clock/trigger input that is finicky.Unless the docs or owner manual list this, I'd call it an error and ask them to fix it.Another more significant one: that some of my modules don't like a trigger or gate hotter than 5v or so.![:slapfight:]( "slapfight")
CLKs and TRIGs are time setters and should not need to be any particular level. Except being high 'enough' to actuate the circuits.
I think I’ve run into a few other modules that have come and gone that were a little particular about the gates/triggers fed, though which they were is escaping me atm. I think the Step 8 I had was a little picky also, and I seem to recall a delay as well but I forget which. But anyway — if you run into this phenomenon, try attenuating the gate or trigger a little and see what happens.
Statistics: Posted by lfad — Mon Mar 04, 2024 11:37 am