I know I did something for Stolperbeats so let me check it out and get back to you.Got a question on Stolperbeats - are you sending it clock from the Cirklon and then sequencing modules with stolperbeats? I was thinking about a mini build of Stolperbeats and an Erica Drum sampler module, but it's tough to find much info on that combo.I can tell how I have implemented this for Stolperbeats which has a reset in. It should work with Pams if you set the Run input to RESET.Need some help from someone who might know clocking with tthe cirklon to Pams Pro Workout.. for the life of me I can not get start/stop messages sent to the pams from the CVIO. I can get pams to be recognized by the cirklons clock, which will keep it running, but I don't have the ability to start/stop. Would be appreciated if anyone has any guidance on this!
Edit: I can get it to work just fine with din sync, but need that channel freed up for another machine.
By default, Cirklon sends MIDI clock ticks even when stopped. If you don't wish to send MIDI clock ticks when stopped, this option can be toggled in the MIDI Configuration page by holding SHIFT and pressing the encoder below <mclk send>. When this option is active, < and > characters will appear around the clock send mode. That will mean that clock stops when Cirklon is stopped. (Manual page 7-3.)
The next thing to do is use a second gate port as a Reset. Go to CVIO Configuration Gate Port Settings and set the ppqn setting for that gate port to "rst". (Manual page 8-9.)
I hope that works for you.
Statistics: Posted by dubonaire — Tue Oct 29, 2024 3:19 am