Please remember that transistors are rather slow switches, good for static switching but not necessary for dynamic.
Using high-value resistors in collector and base circuits only increase switching times.
If you don't mind about it, then ok, if not, think about logic level translators.
Here is for e.g. comparison of switching times (look for Toff!) for BC337 and 2N2369):
"Below is the LTspice simulation showing the difference in switching time between the 2N2369 and the BC337:"[source: https://www.electro-tech-online.com/thr ... or.162089/]
I am using 4505 logic level translators 5V->10V in my Midi2CV project:10V LDO regulator for above:
Using high-value resistors in collector and base circuits only increase switching times.
If you don't mind about it, then ok, if not, think about logic level translators.
Here is for e.g. comparison of switching times (look for Toff!) for BC337 and 2N2369):
"Below is the LTspice simulation showing the difference in switching time between the 2N2369 and the BC337:"
I am using 4505 logic level translators 5V->10V in my Midi2CV project:
Statistics: Posted by ixtern — Sat Dec 21, 2024 2:11 pm