I no longer have mine but from the manual:Reviving old thread I guess but not sure I have another option…
I can’t seem to get the SEEK out of internal clock mode. I want to clock it externally for now… will probably run it both ways.
Saw another user had the same issue in You Tube land? Still love the design of this module - elegant!!!
Please help!
EDIT MODE
In edit mode the keyboard and step property buttons can be used to select the corresponding
function written in square brackets.
Hold < or > then press [ENTER]
Jump - Add or subtract eight from the value currently shown on the display each time
enter is pressed
Default {< or > to select setting} {ENTER to apply} {CANC. to escape without change}
Tempo and Clock Source - This is the default function that is displayed when cancel is
pressed to escape another function.
oF Internal clock is off; the external clock drives the sequencer
05-250 The Internal clock drives the sequencer at the designated tempo from
5 to 250 BPM. A 16th note clock is used resulting in four steps for
every beat. Numbers over 99 are displayed with one or two dots to
indicate the hundreds place.
Statistics: Posted by JohnLRice — Thu Jan 23, 2025 9:04 pm